Supercilium Cream Oxydant 3%

Processing times: Brows, 2 to 10 minutes depending on desired intensity. For an ombre effect, allow the tail to process 6 to 10 minutes, the middle of the brow 4 to 6 minutes, and the front 2 to 4 minutes. Lashes, 5 minutes.

Brows: 1. Shake the Liquid Dye well before use.

2. Remove all makeup before dyeing the eyebrows. For longer lasting staining on the skin, cleanse and exfoliate the brow area so brows are dry and free of oils and sebum, as buildup can prevent proper adhesion.

3. Mix the Liquid Dye and Oxydant into a creamy paste using a ratio of two drops of Liquid Dye to one drop of Oxydant.

4. With the client’s eyes closed, apply the Liquid Dye carefully within the desired brow shape, noting that it begins staining immediately.

5. Allow the dye to process on the brows while monitoring color development, removing earlier from the front of the brows if an ombre effect is desired, with a maximum processing time of 10 minutes.

6. Remove the dye using a dry cotton pad from front to tail, then gently remove any remaining product with a slightly damp cotton pad without scrubbing. Clean edges with a dry cotton swab if needed.

Lashes: 1. Shake the Liquid Dye well before use.

2. Remove all makeup and place eye pads beneath the lower lashes to prevent skin staining.

3. Mix the Liquid Dye and Oxydant into a creamy paste using a ratio of two drops of Liquid Dye to one drop of Oxydant.

4. Apply to the lashes with the client’s eyes closed.

5. Allow to process for 5 minutes.

6. Remove with a dry cotton pad.